Value Your Trade in 30 Seconds

Blog

How to Remove Oil from a Motorcycle Engine | Full Throttle.

Posted By: Full Throttle
Post Date: 10/16/2024

Maintenance of your motorcycle in the correct state is always crucial for smooth running, and among many tasks, removal and change of oil does play an important role. Whether you are a newcomer or an old rider, proper execution of the proper steps ensure that your motorcycle's engine stays in the right shape. In this guide, we explore everything you need to know about cleaning your engine, oil change, and detection issues such as overuse of oil.

How to Clean from Inside a Motorcycle Engine.

How to Remove Oil from a Motorcycle Engine

The cleaning of your motorcycle's inner engine is very important to the health of your bike in the long run. To do this, you should:
Drain Oil: Begin with old oil entirely. Make sure you catch this in a suitable container.
Use Engine Flush: Pour an engine cleaner or flush into the oil reservoir. This will remove all dirt and sludge built inside.
Run the Engine: Keep your bike running so that the engine can idle for 10–15 minutes. This will flush out the inner portions of the engine.
Drain Again: Drain the cleaner, and let all the rest come out, but just make sure nothing is left anywhere inside. This ensures the engine is cleaned thoroughly.
 

Changing Motorcycle Oil Without a Stand.

Change the oil without a motorcycle stand. It is possible if you do not have a motorcycle stand. Here is how you can change your bike's oil:
Park on a Level Surface: Make sure you park your bike in such a level ground. Use the kickstand for balancing.
Oil Drain Plug: Place a container under the oil drain plug, then unscrew it
Allow the Oil to Drain: Then, put the plug back in once it is done draining.
Oil Filter: Remove and install a new one by unscrewing the old filter and screwing in the new one.
Add New Oil: Fill with the good oil for your motorcycle. You're set.


How Many Kilometers Is Enough Change the Motorcycle Oil?

Oil change frequency is determined by your motorcycle's make and model, but generally, the following applies:
Most motorbikes go for 3,000 to 5,000 kilometers.
For the dirt bike or performance-based models, more frequent changes around 2,000 kilometers would be appropriate.
 

Dilution Symptoms in a Motorcycle.

Too much oil can cause a number of problems. Look for these symptoms:
Smoking Exhaust: Too much oil can burn off creating smoke.
Poor Engine Performance: Excessive oil can also increase pressure inside your engine that will affect performance.
Dripping Oil: Too much oil can even leak from seals or gaskets.
Tough Starting: Takes to long, won't start. Check the oil level first.

 

Signs of Too Much Oil in a Dirt Motorcycle.

Just like any other bike: dirt motorcycles could suffer from excess oil. Among the warning signs include:
Engine Overheating: Excess oil causes the engine to overheat, leading to damage.
Power Loss: Too much oil results in slow operations that make the bike lose power.


Too Much Oil in a Motorcycle Won't Start.

Too much oil in your motorcycle means it will not start at all. Why? Excess oil can flood the crankcase, causing pressure that stops the engine from turning over. Drain the oil to a correct level, and then you will be able to start the motorcycle.

How to Clean Fuel Injectors on a Dirt Motorcycle.

The good fuel flow should be what a clean dirt motorcycle is known for. Here is how you can do it yourself, though:


How to Do It Yourself.

1. Remove the Fuel Injectors: Use your bike's manual to find them and remove them
2. Employ a Fuel Injector Cleaner: Spray this straight to the injectors.
3. Let It Sit: Allow the cleaner to penetrate for about 10-15 minutes.
Reassemble the Injectors: After cleaning, put the injectors into the motorcycle and start the engine.

How to Clean Motorcycle Fuel Injectors for Your Street Bike.

Cleaning a motorcycle fuel injectors on a street bike is pretty much identical in process to dirt bikes:
Remove the Injectors.
Utilize a Cleaning Kit.
Feed the Cleaner Through the System: Let it work its magic before reattaching the injectors.

Ignition & Leak Test.

After you fill it up with this new oil and have cleaned everything in your motorcycle, you should now start its engine to check if there are leaks. If there are signs of leaks, switch off the engine right away and check the seals. Doing so will make sure that everything will work properly before you drive off.

Apply New Oils.

With the old oil drained, you can go ahead and fill up with the new oil, as dictated by your motorcycle manual. Better yet, it is also a good idea to use oil that is of high quality and is used specifically in the type of engine, as described in the manual.

Tools.

Here are the tools you will require:
Oil drain pan
Oil filter wrench
Socket wrench
Funnel
New oil filter
Engine oil
Rag or cloth for cleanup

Troubleshooting Why Won't Your Bike Start?

If your bike won't start, and you have done everything in this list, and still, nothing works, then check through these checks :
Cleaned out the airbox: It can be that your airbox is also dirty.
Cleaned the Air Filter: When your air filter is dirty, then there is no intake of air to the engine.
Cleaned the Spark Plugs: Can be dirty and not ignite the fuel correctly.
Blown out cylinders with compressed air: You may get dirt and debris in the cylinders.
Drain out: excess oil if it is overfilled.
Completely Charged: Make sure that the battery has been fully charged.
If your motorcycle still refuses to start, you can push it around in 1st gear. Sometimes this manages to re-start the engine.

FAQs.

Q: How often should I change my motorcycle oil?
A: You should change your motorcycle oil every 3,000–5,000 kilometers or as specified in your owner’s manual.

Q: What happens if I overfill my motorcycle with oil?
A: Overfilling the engine with oil can lead to leaks, smoking, and performance issues.

Q: Can I clean my motorcycle engine without a stand?
A: Yes, you can clean and change your motorcycle’s oil without a stand, but it’s important to be cautious when draining the oil on uneven surfaces.

Buy New & Used Motorcycles at Full Throttle Houston

Looking for your next motorcycle? Visit Full Throttle Houston at 7090 SW Freeway, Houston, TX 77074, or give us a call at (877) 551-9538. Check out our new and used motorcycles online, and follow us on social media:
Facebook | YouTube | Instagram | TikTok

Stay safe and keep your engine running smoothly!


 

 

« Return To The List

Comments:
Add New Comment
Name*:
Email*:
Website:
Title*:
Comment*:

CAPTCHA image
Enter the code shown above in the box below.